Modelithics, Inc Logo
World’s Best RF & Microwave Simulation Models
Visit Modelithics at IMS 2019
 

Modelithics Presentation Schedule for IMS 2019

 

Stop by for some of our booth presentations…

And enter a chance to win $100 CASH!

 
Attend our technology presentations in the Modelithics booth on Tuesday & Wednesday at 10:30am and 2:30pm. With Partner Presentations held in our partner booths each day.
 
Day Time Presentation Location Enter $100 Drawing
Tue 6/04 10:30am NEW! Models & Features for Modelithics COMPLETE Library Including Advanced 5G & 3D Models Modelithics Booth #507
Tue 6/04 2:30pm Advanced Design in Keysight Genesys with Modelithics Models with Special Guest Presenter Chris DeMartino with Microwaves & RF, "Take a Different Approach to Discrete Circuit Design" Modelithics Booth #507
Tue 6/04 4:00pm Partner Presentation Solving RF & Microwave Design Issues Using 3D Component Modeling with Dr. Larry Dunleavy, President & CEO Modelithics ANSYS Booth #818
Wed 6/05 10:30am High Frequency Design Using Scalable Modelithics Models in NI/AWRDE Modelithics Booth #507
Wed 6/05 2:30pm Modelithics GaN Modeling News and Updates Modelithics Booth #507
Wed 6/05 4:00pm Partner Presentation: NEW! Modelithics Library for CadenceⓇ VirtuosoⓇ Design Platform and SpectreⓇ Simulator with Eric O’Dell, Product Manager Modelithics Cadence Booth #942
Wed 6/06 10:30am Partner Presentation: NEW! Modelithics CLR Library for Sonnet Suites with Laura Levesque, Applications Engineer Modelithics Sonnet Booth #430

RF BOOT CAMP AT IMS2019

Monday, June 3, 2019
8:00am - 4:30pm
Boston Convention and Exhibition Center in Boston, MA

More Information on RF Boot Camp!

 

RF Boot Camp is a one-day course that covers the practical design and engineering fundamentals in the RF and microwave field.

The following topics will be presented at RF Boot Camp:

  • • The RF/Microwave Signal Chain
  • • Network Characteristics, Analysis and Measurement
  • • Fundamentals of RF Simulation
  • • Device Modeling and Impedance Matching Basics
  • • Spectral Analysis and Receiver Technology
  • • Signal Generation
  • • Modulation and Vector Signal Analysis



Short Course: Demystifying Noise Parameter Measurements and Model Extraction

Monday, June 3, 2019
8:00am - 5:15pm Room 105
Boston Convention and Exhibition Center in Boston, MA

This short course aims to demystify noise parameter measurements and model extraction, and includes topics such as: an introduction to noise figure and noise parameter concepts; noise parameter calibration; measurement and extraction techniques and best practices; how to validate noise parameter data; an in-depth review of critical variables that affect the accuracy of noise parameter measurements; noise parameter de-embedding; and noise model theory and extraction.


Industry Workshop: Application of Advanced Non-Linear Models to High Efficiency GaN Power Amplifier Design

Thursday, June 6, 2019
10:00am - 12:00pm, Room 157A
Boston Convention and Exhibition Center in Boston, MA

 

This two-hour workshop will focus on understanding the basic principles behind non-linear power amplifier design and will outline simulation-based design methods utilizing Keysight ADS, that starts with a non-linear GaN HEMT model and outlines a series of steps to accomplish basic Class AB PA Design that addresses stability considerations and is designed against a specific set of gain, power, efficiency and VSWR considerations. Extensions to address other high efficiency modes of operation such as Class F, Class J and Doherty amplifier configurations will also be addressed. The first part of the workshop will focus on methods and design flows and the second part will present practical design examples and revealing simulation demonstrations that illustrate various PA design flow steps and simulation methods. The PA design simulation demonstrations will be performed using Keysight Technologies’ Advanced Design System soft-ware and a state-of-the-art non-linear GaN models available from Modelithics for a range of Qorvo GaN power transistors.


Industry Workshop: Introduction to RF and Microwave Filters

Tuesday, June 4, 2019
1:00pm - 3:00pm, Room 157A
Boston Convention and Exhibition Center in Boston, MA

Technologies and filter topologies available to the RF/microwave engineer will be explained. The fundamental trade off facing the designer is between available volume for the filter and unloaded Q (insertion loss). Given a desired filter topology, there are many filter design programs that can give us a reasonable starting point. Applying EM simulation and port tuning to that starting point is then a good strategy to minimize design cycle time. To be emphasized will be simulation-based flows for first-pass filter design success using state-of-the-art software and component models, including compensation for parasitic effects and Monte-carlo tolerance analysis and design centering.


ANSYS 3D Components Exclusive Session at IMS 2019

Wednesday, June 5, 2019
10:00am - 11:30am, Room 204B
Boston Convention and Exhibition Center in Boston, MA

 

Improve collaboration, reduce engineering time and increase sales with ANSYS HFSS 3D components! Design engineers want to perform full-wave EM analysis of their high frequency products to validate performance and catch potential problems before the first prototype but are held back by the lack of 3D component models. We are on a mission to change that! ANSYS HFSS 3D Components enable electronic component suppliers and system integrators to share HFSS 3D models without compromising solution accuracy or design IP. Early adopters are re-porting significant benefits including improved sales, closer engagements with customers, and reduced engineering time. Come to learn how your company can get involved and win new business by becoming part of this paradigm shift. This Special Executive event where we will discuss this new technology and how you can be part of this engineering revolution! Seating is limited, and pre-registration is required.

Register Now 3D Components
Executive Session


Register Today for one or more of the Modelithics sponsored IMS2019 Workshops & Short Courses!

Visit the IMS website on the Workshops page.